Green Valley Ccofri logo

Project x evenflow riptide 50 vs 60?

The following is a comparison of the Project X Evenflow Riptide 50 and 60 models of golf clubs. Both models are designed for maximum distance and forgiveness, with the Riptide 50 having a slightly higher MOI for more stability on off-center hits. The Riptide 60 also has a deeper face and a lower center of gravity, making it more forgiving on miss-hits. Ultimately, both models are great choices for beginner and casual golfers looking for maximum distance and forgiveness from their clubs.

There is no difference between the 50 and 60 models of the Project X Evenflow Riptide shafts. They are both designed to provide a mid-high launch angle with low spin rates.

Who is Evenflow Riptide for?

The Evenflow Riptide shafts are designed for mid-handicap players who are looking for more distance and better control. The shafts are available in a range of weights, flexes, and torques to suit your game.

The different flex ratings for golf clubs refer to how much the club will bend when hitting the ball. The higher the flex rating, the more the club will bend. The regular flex is best for beginners or those with a slower swing speed. The regular plus is for those with a medium swing speed. The stiff flex is for those with a fast swing speed. The extra stiff is for those with a very fast swing speed. The extra stiff plus is for those with a extremely fast swing speed.

What is a CB golf shaft

This type of shaft is designed to add more weight near the butt of the club, which creates a lighter head feel and reduces swing weight by 2 to 3 points. This can generate more club head speed and help you hit the ball further.

See also  lob wedge vs sand wedge

The Even Flow Riptide CB shaft is designed for golfers with smoother swings. It will be available in 40, 50, 60 and 70 gram weights, and softer flexes in the lower weights. Even though these shafts are counter balanced, do not expect more than 1 to 2 swing weights lighter, especially in the heavier shaft weights.

Who should use a 70 gram driver shaft?

70g driver shafts are a good fit for golfers with a swing speed between 105 and 115 mph and an average of 285-290 yards with their driver. If your average drive distance is closer to 285 yards, a 70g shaft will be a good fit for you. If your average drive distance is closer to 290 yards, you may want to consider a heavier shaft.

Fujikura Ventus TR is one of the best in forgiveness. It is made of more carbon and less bonding material to keep it lighter. So, it doesn’t twist on those off-center strikes on the club face. Fujikura name means quality, as it boasts a reputation for reliability. And it holds two of the top 10 spots on our list.

Is 6.0 a stiff shaft?

I find the 60 62g shaft to be extra stiff compared to my other fairway/driver shafts. This one is by far the stiffest of them all, and I really feel it when I’m hitmping with it. It definitely takes some getting used to, but I think it’s a great shaft for those who are looking for a little extra stiffness in their game.

There is a wide range of shaft weights available for drivers, and the 60 gram shaft is one option that is popular among many golfers. These shafts are light enough to help with speed, but also have enough weight to offer more stability during the swing. This can be beneficial for many golfers. If you are looking for a shaft that will help you improve your speed and stability, a 60 gram shaft may be a good option for you.

See also  bubba watson's wife

Which flex shaft is right for me

If you have a fast swing, you should use a stiff shaft. If you have a slow swing, you should use a regular flex shaft. To check your swing speed, a shot tracking device will be the most accurate method. Based on your swing speeds, here are our recommendations: 80-95 mph swing speeds should use regular shafts.

There are a few things you can do to make longer shafts easier to swing. First, make sure you have the correct flex for your swing speed. If the shaft is too stiff, it will be difficult to control. Second, you can try using a lighter grip. This will help you feel the shaft better and make it easier to swing. Third, counterbalancing can make a longer shaft feel more balanced and easier to swing. And when you use a longer shaft, you’ll invariably swing it faster, increasing your ballspeed and overall distance.

What gram driver shaft do pros?

There are a few factors that contribute to how far a ball can be hit with a golf club. The weight of the shaft is one of those factors. The lighter the shaft, the faster the club can be swung. And the faster the club is moving, the farther the ball goes. That’s why the most popular weight for driver shaft-weights on the PGA Tour is still in the mid-60-gram range. Some players have even tried shafts that are less than 50 grams.

Mitsubishi Diamana D + Limited 70Tiger Woods driver shaft is fitted with a Mitsubishi Diamana D + Limited 70 TX, the stiffest golf shaft that you can find. As a result, it is built for faster swing speeds. Furthermore, his driver contains 9-degrees of loft to produce a lower launch for superior control and distance off the tee.

See also  are macgregor golf clubs any good

What does a counterbalance driver do

The most common type of forklift driver is responsible for transporting goods and materials. Once you have your licence, you will be a highly employable candidate in the transport and logistics industry.

CPM stands for “cycles per minute,” which is a measure of the frequency of a golf shaft. To obtain this measurement, a fitter or club builder places the grip end of a golf club into a clamp, then pulls on the tip section of the shaft and releases it to make it oscillate.

What does torque mean in a golf shaft?

torque is a measure of how much a shaft will twist under a certain amount of force. The higher the torque, the more the shaft will twist.

If you’re hitting a 7-iron from around 150 yards, then a regular flex shaft would be the recommended choice. For a graphite or steel shaft, you would want to choose one with a Swing Speed Rating of 70 to 80 mph. If you’re hitting a 5-iron from 150 yards, then a shaft with a Swing Speed Rating of 60 to 70 mph would be the recommended choice.


There is no definitive answer to this question as it largely depends on personal preferences. Some people may prefer the Project X Evenflow Riptide 50 because it has a softer feel and more forgiveness, while others might prefer the Project X Evenflow Riptide 60 because it has a lower spin rate and more workability. Ultimately, it is up to the individual golfer to decide which shaft works best for their game.

The 50 vs 60 debate for the Project X Evenflow Riptide is a close one, but many golfers tend to prefer the 60 shaft because it provides more control and a slightly higher launch angle. If you’re looking for a new shaft to put in your driver, the Project X Evenflow Riptide is a great option and you can’t go wrong with either the 50 or 60.

Michael Piko
Michael Piko

I am a professional golfer who has recently transitioned into the golf coaching profession. I have been teaching the game for more than 15 years and have been teaching professionally for 8 years. My expertise is working with everyone from beginners to pros

Popular Post