Green Valley Ccofri logo

club car reset obc

A Club Car Reset OBC (On-Board Computer) is a procedure used to reset the computer in the vehicle to its original factory settings. This procedure is necessary when certain parameters in the vehicle’s computer have been changed or if an error code has been detected by the computer. The reset process is simple and should only take a few minutes to complete. It is important to follow all safety precautions when performing this procedure, as it can affect the performance of your vehicle.To reset the On-Board Computer (OBC) on a Club Car, follow these steps:
1. Turn the key switch to the “OFF” position.
2. Remove the two OBC access covers located on the driver’s side of the vehicle.
3. Locate the OBC reset switch inside and press it with a pen or paper clip until it clicks.
4. Replace both access covers and turn the key switch to “ON” position.
5. Allow the vehicle to cycle through its self-diagnostic process by pressing and releasing the accelerator pedal three times in succession with no more than one second between each press/release operation. The Club Car should run through its diagnostics and then be reset when complete.

Instructions for Resetting the On-Board Computer on a Club Car

To reset the on-board computer of a Club Car, first turn off the power switch located on the side of the car. After this, locate the fuse box and remove the fuse that is connected to the onboard computer. Once this is done, reinsert this fuse and turn back on the power switch. Once these steps are completed, your Club Car’s onboard computer has been reset.

It is important to note that resetting your onboard computer should only be done when absolutely necessary. Resetting can sometimes cause problems with your car’s performance or settings. If you experience any issues after resetting your onboard computer, contact a certified mechanic or professional for assistance.

Additionally, if you do decide to reset your Club Car’s on-board computer, make sure to check all cables and connections before you turn it back on again. Make sure all wires are properly connected and that no part of them are exposed or damaged in any way. Doing so will help ensure that your car runs smoothly after a reset has been performed.

What Does the OBC Do on a Club Car?

The On-Board Computer (OBC) is an important component of any Club Car golf cart. It is responsible for controlling the speed, charging the batteries, and monitoring the electrical system. The OBC monitors the voltage and current of the batteries, and also monitors how much power is being drawn from them. It also controls the speed of the cart, ensuring that it behaves within a safe range. Lastly, it can be programmed to display useful information such as battery levels and vehicle diagnostics.

The OBC is instrumental in keeping your Club Car running at peak performance and efficiency. It ensures that your cart runs at its optimal speed without overloading the system, thus preventing any potential damage from occurring. Furthermore, it helps to extend the life of your battery by monitoring its charge levels and making sure that it doesn’t become overcharged or run low on power. The OBC is also able to diagnose any problems with your vehicle’s electrical system before they become serious issues that require costly repairs.

See also  electric golf cart range

In summary, the On-Board Computer (OBC) plays an essential role in maintaining your Club Car’s performance and safety. It controls the speed, charges the batteries, and monitors their power levels while providing useful information such as battery levels and vehicle diagnostics. With its help, you can be sure that your Club Car will remain in top condition for years to come.

Understanding the OBC in a Club Car

The On Board Computer (OBC) is an essential component of Club Car vehicles. It is responsible for monitoring and providing feedback on the performance of the vehicle, as well as providing diagnostic capabilities. The OBC is connected to a variety of sensors throughout the vehicle, allowing it to measure the performance of the engine, battery, brakes, and other components. It also allows users to control various functions such as speed and acceleration settings, and steering control. Understanding how the OBC works is essential for troubleshooting any issues that may arise with your Club Car vehicle.

The OBC is composed of several components, including a central processing unit (CPU), memory chips, an input/output interface (I/O), and data buses. The CPU is responsible for interpreting data from the various sensors throughout the vehicle and making decisions based on that data. Memory chips are used to store settings that can be adjusted by users or technicians. The I/O interface allows information to be sent from the OBC to other components in the system while data buses allow information to be transmitted between different components within the system.

The OBC also contains diagnostic software that can detect problems with different parts of your Club Car vehicle. This software can detect problems ranging from simple issues like low battery voltage or spark plug misfiring all the way up to more complex issues like broken wires or faulty wiring harnesses. By running diagnostics on your car’s systems, you can quickly identify any potential issues before they become major problems.

In addition to diagnostics, your Club Car’s OBC also offers a variety of features that make driving your car easier and more enjoyable. For example, it can enable automatic speed control settings so you don’t have to constantly adjust your speed manually while driving. It can also provide feedback on how efficiently you are driving so you can make adjustments as needed to improve fuel economy.

Overall, understanding how your Club Car’s OBC works is essential if you want to get the most out of your vehicle. By familiarizing yourself with its capabilities and features, you can ensure that it runs at its peak performance for years to come.

Advantages of Resetting the OBC in a Club Car

Resetting the onboard computer (OBC) in a Club Car offers several benefits for vehicle owners. Most notably, resetting the OBC can help to improve the overall performance and efficiency of your vehicle. It can also help to keep your vehicle running smoothly for longer periods of time. Resetting the OBC can also help to diagnose any potential problems that may be occurring with your vehicle, allowing you to take corrective action before any major damage occurs. Additionally, resetting the OBC can help to save you money on fuel costs by improving fuel efficiency and reducing engine wear and tear. Finally, resetting the OBC can help you maintain a higher level of safety on the road by ensuring that all components are functioning properly.

See also  will new balance replace defective shoes

In order to take advantage of these benefits, it is important to understand how to properly reset the OBC in a Club Car. The process is relatively simple and can be completed in just a few minutes. First, you will need to locate the battery compartment located under the hood of your vehicle. Once located, remove its cover and locate the OBC fuse box inside it. Once identified, remove its cover as well and locate the “reset” button on it. Push this button firmly for a few seconds until you hear an audible click or feel a vibration within your vehicle indicating that it has been successfully reset.

By following these steps, you will be able to take advantage of all of the benefits associated with resetting your onboard computer in a Club Car. Doing so will ensure that your vehicle runs more efficiently and safely while helping you save money on fuel costs over time.

Resetting the On-Board Computer (OBC) in a Club Car

Resetting the On-Board Computer (OBC) in a Club Car is an important maintenance procedure that can help to ensure proper functioning of the vehicle. The OBC contains all of the necessary settings and codes for the car’s operation, so resetting it can help to keep your car running efficiently and safely. However, there are both advantages and disadvantages to resetting the OBC.

One advantage of resetting the OBC is that it can help to troubleshoot any issues that may be occurring with your vehicle. If you are experiencing any kind of abnormal behavior or malfunctioning parts, resetting the OBC can help to rectify these issues and get your car running properly again. Additionally, resetting the OBC can help to improve fuel economy by optimizing settings for more efficient operation.

On the other hand, one disadvantage of resetting the OBC is that it will erase any personalized settings you have made such as seat memory or radio presets. Additionally, if you are not careful when resetting the OBC, you may end up erasing important codes or settings which could cause further problems with your vehicle. Furthermore, if you do not have access to a specialized tool that is needed to perform this procedure correctly, then it could be difficult for you to complete this task without causing any damage to your car.

Overall, while there are some potential advantages and disadvantages associated with resetting the OBC in a Club Car, it can be an effective way of troubleshooting issues and improving fuel economy if done properly. Therefore, it is important that you take all necessary precautions before attempting this procedure on your own in order to ensure safe operation of your vehicle.

Preparing to Reset the OBC in a Club Car

Resetting the on-board computer (OBC) in a Club Car is an important step in preparing for regular maintenance and troubleshooting any issues with your golf cart. Before resetting the OBC, it is important to make sure all of the safety procedures are followed. This includes making sure all power sources are disconnected and that no one is inside or around the vehicle. It is also important to check that all personal items have been removed from the vehicle before beginning work.

After completing these safety steps, you can begin resetting your Club Car’s OBC. To do this, you will need to locate and remove the OBC fuse located in the engine compartment. This fuse may be hidden behind other components, so it is important to take care when searching for it. Once you have located and removed this fuse, wait 10 seconds before replacing it in its original position.

See also  bridgestone j33

Finally, you will need to turn on all power sources and test out your golf cart’s functionality. If everything works properly, then you have successfully reset your vehicle’s OBC. It is recommended that you check your owner’s manual for specific safety instructions before beginning any work on your golf cart. Following these steps will help ensure that your Club Car is safe and efficient for years to come!


Resetting the On-Board Computer (OBC) on a Club Car golf cart can be a difficult task if you don’t know the proper steps. In this guide, we’ll go over step-by-step instructions for resetting the OBC on your Club Car. After following these steps, your OBC should be reset and ready for use.

Step 1: Locate OBC

The first step is to locate the OBC in your Club Car. It is usually located on the back of the golf cart near the battery compartment. You may need to remove some panels or covers in order to access it.

Step 2: Disconnect Battery

Next, you will need to disconnect the battery from your Club Car. To do this, you will need to locate the positive and negative terminals of your battery and then remove each terminal from its respective post. Make sure to keep track of which post each terminal was connected to, as it is important for re-connecting later.

Step 3: Wait for Battery to Discharge

Once you have disconnected the battery, you will need to wait for it to discharge completely before proceeding any further. This can take up to an hour depending on how long it has been since you last used your golf cart.

Step 4: Reconnect Battery

Once the battery has discharged completely, you can reconnect it by placing each terminal back onto its respective post (positive terminal should be connected with positive post and negative with negative post). Make sure that each terminal is securely connected before proceeding any further.

Step 5: Reset OBC

Once the battery has been reconnected, you can reset the OBC by pressing and holding down its reset button until a light flashes or a beep sounds (this could take up to 30 seconds). Once complete, turn off all electrical components in your Club Car and then turn them back on again.

After following these steps, your OBC should now be successfully reset and ready for use. Be sure to check all electrical components in your Club Car before operating it again. If any issues arise during this process, contact a local technician for assistance.


The Club Car Reset OBC is a valuable tool for ensuring your golf cart is running properly and safely. It can help you save time and money by diagnosing issues with the vehicle’s electrical system, ensuring that any problems are addressed quickly and correctly. With its easy-to-use interface and helpful support documents, the Reset OBC can be a great way to keep your vehicle in peak condition. By following the steps outlined above, you can quickly reset your Club Car’s OBC and start enjoying the benefits of a well-maintained golf cart.

Whether you’re an experienced car owner or just getting started with golf cart maintenance, the Club Car Reset OBC will help you get the most out of your vehicle. With its simple setup process and comprehensive support resources, this tool is an invaluable asset for any golfer looking to get more out of their vehicle. Whether you’re trying to troubleshoot a problem or simply wanting to keep your vehicle in top condition, the Reset OBC can help ensure that your golf cart runs smoothly for many rounds of golf to come.

Michael Piko
Michael Piko

I am a professional golfer who has recently transitioned into the golf coaching profession. I have been teaching the game for more than 15 years and have been teaching professionally for 8 years. My expertise is working with everyone from beginners to pros

Popular Post