Green Valley Ccofri logo

how to measure a putter length

Measuring the length of a putter is an important step in customizing your golf game. Putter lengths vary from player to player depending on their personal preferences and the size of their clubs. If you are looking to buy a new putter or measure your existing one, there are a few simple steps you can take to get an accurate measurement. In this guide, we will explain how to measure a putter’s length so that you can find the perfect fit for your game.Measuring the length of a putter is a simple task that can be done at home. To measure the length of a putter, you will need an accurately marked tape measure.

Begin by placing the club flat on the ground in front of you. Place the end of the tape measure at the end of the grip on the club and extend it along the shaft until you reach the head. Mark this distance on the tape measure and then read off the length to get an accurate measurement for your putter.

What You Need to Measure the Length of a Putter

Measuring the length of a putter is an important step when shopping for new golf clubs. Knowing the correct length of putter needed can help you find the right fit for your game. To measure the length of a putter, you will need a tape measure, a ruler, and a putter. When measuring the length of your putter, it is important to use both inches and centimeters to ensure accuracy.

Start by taking the tape measure and running it down the shaft of the putter from top to bottom. Make sure that you get an accurate measurement in both inches and centimeters. Once you have this measurement, use the ruler to measure from the end of the butt end to where it meets up with the grip. This will give you an accurate measurement in inches and centimeters that can be used when selecting a new club.

It is also important to keep in mind that different brands and models may have different lengths available, so make sure that you are measuring from a standard-sized putter before selecting one for purchase. Additionally, some putters may have adjustable shafts which allow for further customization of length. If this is something you are interested in doing, make sure that you get an accurate measurement before making any adjustments.

Having an accurate measurement of your putter’s length can help ensure that you find the right fit for your game and swing speed. With proper measurements taken, selecting a new club should be much simpler and easier than ever before!

Checking the Standard Length of a Putter

When it comes to golf putters, the standard length is typically around 35 inches. This length enables players to use the putter comfortably and accurately, but it can be adjusted depending on the individual player’s height or preference. The standard length for a putter is usually determined by the manufacturer, so it’s important to check the specifications before you buy one.

If you’re taller than average, you may find that using a longer putter helps with your accuracy and distance control. The same goes for shorter golfers who may benefit from a shorter putter. In either case, you can purchase an adjustable putter that allows you to adjust the length of the shaft up or down.

See also  taylormade mini driver 2023

You should also take into account your personal preference when choosing a putter. Some golfers prefer longer or shorter shafts depending on their stance and swing style. If possible, test out different lengths in a store before buying one so that you can get an idea of what works best for your game.

Finally, don’t forget to check if your putter meets USGA regulations before using it in competition. Some adjustable models may not meet these guidelines because they aren’t considered standard length by the USGA.

Following these tips will help ensure that you get a quality putter that fits your needs and meets all necessary regulations for competitive play.

Adjusting the Length of a Putter

Golfers are able to adjust the length of their putter to fit their size and playing style. Adjusting the length of a putter is an important part of the game, as it will affect your balance and consistency when putting. To properly adjust the length of your putter, you will need to have the right tools and follow a few simple steps.

First, you will need to measure your height. This will determine how long your putter should be in order to achieve proper balance and comfort. The ideal length for most golfers is between 32 and 35 inches. Once you have determined your ideal length, you can begin to adjust the length of your putter.

Next, you will need to loosen the grip on your putter. This can be done by using a grip wrench or pliers. Once the grip is loosened, you can begin to adjust the shaft length by using either an adjustable shaft or a cutting tool such as a hacksaw or pipe cutter. If using an adjustable shaft, simply loosen the screws at either end of the shaft until it reaches your desired length. If using a cutting tool, make sure that all safety precautions are followed before making any adjustments.

Finally, make sure that all necessary components are reattached after adjusting the length of your putter. This includes tightening down all screws or bolts and replacing any worn-out parts with new ones if needed. Once everything has been reattached correctly, take some practice swings with your newly adjusted putter in order to get used to its new feel on the course.

Adjusting the length of a putter is an important part of becoming a better golfer as it can affect both accuracy and comfort when putting. By following these steps and having the right tools on hand, golfers can easily adjust their own putters for maximum performance on each hole they play.

Measuring the Shaft of a Putter

Measuring the shaft of a putter is an important step in determining the appropriate lie angle for a particular golfer. The lie angle is the angle between the center of the shaft and the ground when the club is in its address position. A proper lie angle helps to ensure that the putter face returns to square at impact, resulting in more consistent and accurate shots. To measure the shaft, you will need a ruler, a straight edge, and a protractor.

Begin by positioning your putter on a flat surface with its sole parallel to the ground. Place your straight edge along the length of the shaft and use it as a guide to mark points at each end with a pencil or pen. Next, use your ruler to measure from one point to another and record this measurement on paper. Finally, place your protractor against one end of your shaft, aligning its centerpoint with your mark, and record this angle on paper as well.

See also  illegal wedge

Once you have recorded both measurements – length and angle – you can refer to charts that indicate what type of lie angles are recommended for various heights or lengths of players. When it comes time to purchase or adjust your putter, these measurements will help you select or adjust it correctly for optimal performance. Measuring the shaft of your putter is an important step in ensuring that you get maximum performance out of every stroke!

Measuring for Loft and Lie Angle

Measuring for loft and lie angle on a golf club is an important part of the process of custom fitting. Knowing the correct angles can greatly improve your accuracy when hitting the ball. Loft is the angle between the ground and the clubface, while lie angle is the angle between the shaft and the ground. Both of these angles influence how far you hit the ball, as well as its direction. To ensure that your clubs are set up correctly, it’s important to measure both loft and lie angle accurately.

The easiest way to measure loft and lie angle is with a protractor. A protractor is a device that measures angles in degrees, allowing you to determine precisely how much loft or lie each club in your bag has. To use a protractor, you will need to place it on top of a flat surface that is perpendicular to your club’s shaft. Then adjust the protractor so that one side lines up with your club’s shaft while the other side rests against either its toe or heel. Finally, rotate the protractor until its pointer points towards zero on its scale, then read off the degree measurement from its indicator window.

It’s also possible to measure loft and lie angles without using a protractor. Instead, you can use calipers or even a ruler if you have one handy. To measure with calipers, place them around your golf club’s hosel area and adjust them until they fit snugly against it without touching any other part of the clubhead. Then read off their measurement in millimeters for an approximate degree measurement of your club’s loft or lie angle. Alternatively, if you have a ruler available then you can easily measure from one end of your golf club’s hosel area to another end to get an estimation of its angles as well.

In conclusion, measuring for loft and lie angles on your golf clubs is essential for custom fitting and improving accuracy when hitting shots out on course. You can do this easily using either a protractor or some other instrument such as calipers or even just a ruler if necessary. Once you have taken these measurements accurately then you’ll be able to make any adjustments needed in order to get maximum performance out of each club in your bag!

Understanding Golf Club Lengths

Golf clubs come in a variety of lengths, and it is important to understand the differences between them. The length of the golf club can affect the way the ball is hit, as well as its trajectory. Understanding golf club lengths can help you choose the right clubs for your game.

Golf clubs are typically measured from the heel of the club to the end of the shaft. The standard length for a men’s golf club is 43 inches, while a women’s golf club is usually 41 inches or shorter. Shorter clubs are often used by players who have shorter arms or are new to the game. Longer clubs are typically used by taller players who have longer arms, or those who want more distance off their shots.

See also  Pxg vs titleist?

The length of a golf club can also affect its swing weight. Swing weight measures how much effort is required to swing a golf club at a certain length. A longer club will require more effort to swing than a shorter one, so it’s important to consider your strength and fitness level when choosing your golf clubs.

In addition to length, other factors such as lie angle and shaft flex can also affect how well you hit the ball. Lie angle describes how far off vertical an iron’s centerline lies when it is at address position; different lie angles can help you hit higher or lower shots depending on what you need for your game. Shaft flex describes how much flex there is in an iron shaft; stiffer shafts will help you generate more power, while softer shafts will help you create more spin on your shots.

Choosing the right set of golf clubs requires some research and trial and error, but understanding golf club lengths can be an important first step in finding the perfect set for your game. With some practice and experimentation, you can find clubs that work best for you and improve your performance out on the course!


The most important factor that affects the length of a putter is the height of the golfer. Generally, taller golfers require longer putters as they are more comfortable to use. Putters come in different lengths and so it is important to choose one that suits the individual’s height. The right length ensures proper alignment and balance while putting. If the putter is too short, it can lead to an uncomfortable posture and an awkward angle when striking the ball.

Style of Putting

The style of putting can also affect the length of a putter. Different styles require different lengths of putters in order to be most effective. For example, a golfer who has an aggressive style may want to use a shorter putter in order to have better control over their stroke. On the other hand, a golfer who has a more laid-back style may want to use a longer putter as it allows for more leverage and power when striking the ball.

Grip Size

The size of the grip on a putter can also affect its length. For example, if the grip is too large for a golfer’s hands, they may find it difficult to hold onto and control their shot. Therefore, it is important to select a grip size that fits comfortably in your hands in order for you to be able to make accurate shots with your putter.

Type of Putter

Finally, the type of putter being used can also affect its length. Generally, blade-style putters are shorter than mallet-style putters as they require less surface area for contact with the ball. Mallet-style putters are typically longer due to their larger head size which helps provide stability during shots and improved accuracy when putting from long distances.


Measuring the length of a putter is an important part of getting the right fit. The proper length will help golfers achieve a consistent putting stroke and improve their overall game. Although each golfer’s individual preferences should be taken into consideration, the conventional sizing guide should provide an adequate starting point when selecting a putter. With the right combination of size, weight, and feel, golfers can improve their putting accuracy and confidence on the course.

Ultimately, finding the right putter length is a process that requires trial and error. Golfers should experiment with different lengths to find the one that works best for them. With patience and practice, they can develop an effective putting stroke that will give them an advantage when competing on the course.

Michael Piko
Michael Piko

I am a professional golfer who has recently transitioned into the golf coaching profession. I have been teaching the game for more than 15 years and have been teaching professionally for 8 years. My expertise is working with everyone from beginners to pros

Popular Post