odyssey putter insert replacement

Welcome to Odyssey Putter Insert Replacement! Here, you’ll find everything you need to know about replacing the insert of your Odyssey putter. We’ll discuss the different types of inserts available, how to choose the right one for your needs, and how to go about replacing it. Whether you’re a beginner or an experienced golfer, this guide will provide all the information you need for a successful insert replacement.1. Begin by removing the putter head from the shaft by loosening the screws with a screwdriver.
2. Open the putter head and remove the old insert from the putter head.
3. Place the new insert into the putter head, making sure that it is pressed firmly into place.
4. Tighten up the screws that were removed in step 1 to secure the new insert in place.
5. Re-attach the putter head to the shaft and tighten until it is securely attached.

What You’ll Need for Odyssey Putter Insert Replacement

Replacing the insert on your Odyssey putter requires a few supplies and tools. You will need a Phillips head screwdriver, a putter grip removal tool or a utility knife, and replacement inserts. You may also wish to purchase some double-sided tape to help secure the new insert. Additionally, you may want to have some adhesive solvent on hand should you encounter any difficulty in removing the old insert. Once all of these items are gathered, you are ready to begin replacing your putter’s insert.

The first step is to remove the old putter grip, which can be done with either a putter grip removal tool or a utility knife. If using the latter, make sure to be very careful not to damage the club shaft or head as you are removing it. Once the old grip is removed, unscrew the two Phillips head screws that secure the old insert in place. Remove the screws and carefully take out the old insert from its cavity.

Once you have removed the old insert, inspect it for any signs of wear or damage. If it appears to be in good condition, then you can reuse it with some fresh double-sided tape for additional security. If not, then it’s time to install your new replacement insert. Secure it into place with two Phillips head screws and make sure that there is no excess adhesive around its edges.

Finally, reinstall your putter’s grip using either a putter grip removal tool or a utility knife. Make sure that all of its edges are properly secured so that it doesn’t move around during your swing. Once everything is in place, take your new Odyssey putter out for a test drive and enjoy!

The Benefits of Replacing an Odyssey Putter Insert

Replacing your Odyssey putter insert can have a number of benefits. An upgraded insert can help improve your putting accuracy, distance control, and overall performance on the golf course. Furthermore, replacing the insert can also help reduce the wear and tear on your putter over time. Here are some of the advantages that replacing an Odyssey putter insert can provide:

Improved Feel and Performance

Odyssey putters feature different kinds of inserts that serve different purposes. For example, some of their inserts are designed to provide a softer feel and better sound at impact. Other inserts are designed to produce a firmer feel while others are designed to provide more consistent roll on the green. By replacing the insert in your putter with one that provides better feel and performance, you can improve your putting accuracy and distance control.

See also  golfer cheyenne woods

Better Durability

Replacing your Odyssey putter insert can also help increase its durability. Worn out or damaged inserts may not offer as much support as new ones do. As a result, they may not be able to absorb as much shock from impacts with the ball. This could lead to more wear and tear on the putter over time. Replacing an old or worn out insert with a new one will help keep your putter in good condition for longer.

Increased Ball Control

Another advantage of replacing an Odyssey putter insert is that it can help increase ball control. Different types of inserts can provide different amounts of spin or backspin when striking the ball. By using an insert that offers more spin or backspin, you can gain greater control over where you want the ball to go after impact with the clubface.

Overall, replacing an Odyssey putter insert can offer a number of benefits for golfers looking to improve their game. Not only does it provide improved feel and performance, but it also helps increase durability and ball control as well. If you’re looking for ways to upgrade your putting game, consider replacing your Odyssey putter insert today!

Step 1: Select the Right Insert

Choosing the right Odyssey putter insert is an important part of the installation process. It is important to make sure you select the correct size and style for your putter head. There are a variety of inserts available, ranging from classic metal to white hot and superstroke designs. Make sure you select a model that fits your putter head and will provide the best performance for your game.

Step 2: Remove Old Insert

Once you have selected the right insert, it is time to remove the old one from your putter head. Depending on how long you have had your putter, it may take some effort to remove it. You can use a small flathead screwdriver or other tool to help pry off the old insert. Be careful not to damage any of the components of your putter while removing the old insert.

Step 3: Clean Putter Head

Before installing a new Odyssey putter insert, it is important to clean up any residue left behind from removing the old one. Use a soft cloth or cotton swab dipped in rubbing alcohol or mild soap-and-water solution to wipe away any dirt or debris on the surface of your putter head. Make sure it is completely dry before moving on to the next step.

Step 4: Apply Putty Adhesive

The next step in installing a new Odyssey putter insert is applying some adhesive putty around the edges of where the insert will be placed in order to ensure that it will stay firmly in place once installed. Apply an even layer of adhesive all around so that there are no gaps or weak spots.

Step 5: Install Putter Insert

Once you have applied adhesive around the edges, place your new Odyssey putter insert into position and press down firmly until it locks into place. Make sure that all edges are evenly lined up and there are no gaps between them and your putter head.

Step 6: Let Dry

It is important to allow time for everything to dry fully before using your new Odyssey Putter Insert. This should take no more than a few hours, depending on how much adhesive was used and how thickly it was applied. Once dry, you should be ready to hit some balls with your newly installed Odyssey Putter Insert!

See also  branden grace witb

Common Issues with Odyssey Putter Insert Replacement

Replacing the insert in an Odyssey putter can sometimes be a tricky process. There are a few common issues that can arise when trying to replace the insert, some of which are outlined below.

The first issue is that the putter head may not fit properly in the new insert. This can happen if the putter head is too large or too small for the new insert. To ensure a proper fit, measure the size of the putter head before purchasing a new insert, and make sure it matches up with the measurements of your existing insert.

Another issue is that the new insert may not properly align with the grooves on your golf ball. This can result in mis-hits or other problems when hitting off of your putter. To fix this, you will need to adjust the orientation of your new insert so that it is properly aligned with your golf ball’s grooves.

Finally, if you are installing an aftermarket insert, it may not match up perfectly with your putter head’s design. This could cause problems such as excessive vibration and noise during use. To avoid this problem, make sure to purchase an aftermarket insert that is made specifically for your Odyssey putter model and size.

In short, replacing an Odyssey putter’s insert can be a tricky process due to potential fitting issues or misalignment problems. To ensure a successful replacement process, measure the size of your existing insert and make sure it matches up with any potential replacements before purchasing them. Additionally, if you are using an aftermarket product make sure it is designed for your specific Odyssey model and size.

Finding the Right Replacement for Your Odyssey Putter Insert

If you’re looking to replace your Odyssey putter insert, it can be a daunting task. With so many different models and styles available, it can be difficult to decide which one is right for you. Fortunately, there are a few things you can do to make sure you find the perfect replacement.

First, consider the type of putter head you have. Different inserts are designed to fit different types of Odyssey putters. For example, if you have an Odyssey Tank putter, then you’ll need an insert specifically designed for that model. You should also take into account the size and weight of your putter as well as its loft angle when selecting an appropriate insert.

Once you’ve narrowed down your choices based on the type of putter head and size/weight requirements, then it’s time to start looking at the differences in feel and performance between various inserts. Different inserts have different levels of responsiveness and feel, so it’s important to select one that best suits your game. You may also want to consider how much spin a particular insert offers; this will depend on your preference as well as the type of shots you typically make with your putter.

Finally, do some research on the company that produces the insert you’re considering purchasing. Check out customer reviews online or ask other golfers who have used that particular brand before making your decision. This will help ensure that you get a quality product with excellent performance characteristics that will last for years to come.

Finding the right replacement for your Odyssey putter insert doesn’t have to be difficult if you take into account all of these factors before making a purchase. With just a little bit of research and careful consideration, you can find an ideal fit for your game and enjoy improved performance on the greens!


When selecting a replacement Odyssey putter insert, the first step should be to research the different options available. Many golfers prefer to select a putter insert that has been designed specifically for their putter model, as this will ensure that it is optimally suited for their particular putting style and stroke. It is also important to consider the material of the insert, as some materials are better suited for certain types of strokes than others. Taking the time to research and compare all of the available options will help golfers choose the best option for their game.

See also  wilson 1200 lt


Once golfers have narrowed down their choices, it is important to test out each of them before making a purchase. Trying out different putter inserts at a local golf store or driving range can help golfers get an idea of how different inserts feel during actual play. This will allow them to determine which insert best suits their putting style and provides them with the most control over their shots.


Reading reviews from other golfers who have already tried out various Odyssey putter inserts is another great way to narrow down one’s choices. Reviews can provide insight into how certain inserts perform in real-world conditions, which can be especially helpful when choosing between two similar models or materials. Additionally, some reviews may contain tips on how to properly install and maintain an Odyssey putter insert, which can be very useful information when making a purchase decision.


Finally, it is important to consider price when selecting an Odyssey putter insert. While quality should always be a priority, there are often cost-effective options that still provide excellent performance on the course. Comparing prices between different retailers or looking for sales can often help golfers find great deals on quality products.

Preparing Your Old Odyssey Putter Insert for Replacement

Odyssey putter inserts are a golf club component that provide a smooth surface on the face of the putter, allowing for consistent contact with the golf ball. When it comes time to replace your old putter insert, you’ll need to prepare it for removal. Preparing your old Odyssey putter insert for replacement is relatively simple and can be done in just a few steps.

The first step is to remove any dirt or debris from the face of the putter. Use a soft cloth and some mild detergent to gently wipe away any dirt or debris that may have accumulated over time. Be sure to allow the face of the club to dry completely before proceeding.

Next, you’ll need to loosen any screws that may be holding the insert in place. Using a small screwdriver, carefully loosen each screw until they are loose enough to be removed by hand. Be sure not to tighten them back down once they’re loosened, as this could cause damage to the insert.

Once all of the screws have been removed, gently pry up on the insert with a flathead screwdriver and remove it from its seating area in the clubface. If necessary, use some gentle pressure with your hands or a rubber mallet to help remove it from its seated position.

With the old Odyssey putter insert removed, you can now install its replacement. Place your new insert into position in the clubface and secure it with a few screws. Make sure that all screws are tightened securely before using your new Odyssey putter insert on the course.


Replacing the insert of an Odyssey putter can be a relatively simple process for golfers who have the correct tools and supplies. It is an affordable way to experiment with different inserts to feel the effects on your stroke and game. While it may be a bit daunting at first, following the steps outlined in this article can help simplify the process. Be sure to always use caution when removing and replacing parts of your putter. With a few simple tools and some insight, golfers can transform their putters into a new and improved instrument that fits their game.

In conclusion, replacing the insert of an Odyssey putter is not only possible but it can also be beneficial for golfers looking to maximize their performance. With some patience and precision, they can find the perfect fit for their stroke, which could make all the difference in their game.