Green Valley Ccofri logo
Close this search box.

refurbish scotty cameron putter

The Scotty Cameron putter is an iconic choice for golfers of all abilities. With its precision craftsmanship and ergonomic design, the Scotty Cameron putter provides golfers with incredible accuracy and control. Refurbishing this classic putter can help restore its original performance and appearance. Whether you are a collector or a golfer looking to improve your game, refurbishing a Scotty Cameron putter is a great way to enhance your experience on the course.Step 1: Begin by wiping down your Scotty Cameron Putter with a soft cloth to ensure that all dirt and debris are removed.

Step 2: Use a light grit sandpaper to remove any rust or corrosion that has developed on the clubhead. Once finished, wipe the head down to remove any dust or particles.

Step 3: Apply a small amount of a metal polish or clubhead cleaner to the putter head and use a soft cloth to buff it until it shines.

Step 4: Use a mild soap and warm water to clean the shaft and grip of your putter. Make sure all dirt and grime is removed before drying with a soft towel.

Step 5: Replace the grip of your putter if necessary. Be sure to buy one that fits properly, as an ill-fitting grip can affect your game play.

Step 6: Carefully inspect the rest of your putter for any signs of damage or wear and tear. If any repairs are needed, contact an expert in Scotty Cameron Putters for assistance in making them.

Step 7: Finally, give your Scotty Cameron Putter one last good wipe-down and admire its refurbished beauty!

1. Improved Performance

Refurbishing your Scotty Cameron putter can improve its performance by restoring the original design for optimized accuracy and consistency. Refurbishing can also help to improve the feel of the putter, as it can help restore the original weight and balance of the club. This will ensure that you are getting the best results possible out of your putter, allowing you to get a good read on each shot.

2. Aesthetic Appeal

Whether you use your Scotty Cameron putter on a daily basis or it is stored away in your golf bag, having a well-maintained putter is an important part of showing pride in your game. Refurbishing your Scotty Cameron putter can help to restore its aesthetic appeal, allowing it to look as good as new when you take it out onto the course. This will give you an added boost of confidence when you set up for each shot.

3. Longer Lifespan

Refurbishing your Scotty Cameron putter is one of the best ways to ensure that it has a long lifespan on the course. By restoring its original design features and replacing any worn or damaged parts, you can help to ensure that your putter will last for many years to come. This will save you money in the long run as you won’t have to replace it anytime soon, allowing you to continue using it on the course for years to come.

Pros of Refurbishing a Scotty Cameron Putter

Refurbishing a Scotty Cameron putter is an excellent way to extend the life of your investment. Refurbishment is an inexpensive process that can restore the original look and feel of your putter, making it look and perform as if it were brand new. Refurbishment also helps maintain the resale value of the putter, which could be important for those who may want to upgrade or sell their putter in the future. Additionally, refurbishing can help improve a putters performance by refining its shape or weight, making it more suitable to your personal golf game.

See also  brooks koepka yardages

Cons of Refurbishing a Scotty Cameron Putter

Although there are many benefits to refurbishing a Scotty Cameron putter, there are also some potential drawbacks. The process of refurbishment can be time consuming and complex, so it may not be suitable for those with limited time or technical knowledge. Furthermore, some components that may need replacing during refurbishment may be hard to find or expensive, increasing the overall cost of the process. Lastly, the cost of refurbishment will likely exceed the cost of purchasing a new putter in some cases.

Scotty Cameron Putter

If you’re a golfer looking to refinish your Scotty Cameron Putter, you’ll need some basic supplies to get the job done. Refinishing your putter can breathe new life into it and help you become more consistent with your putting stroke. Here’s what you need to get the job done:


You’ll need some sandpaper in various grits for the refinishing process. Start with 220 grit sandpaper and work up to 400 or 500 grit for a smooth finish. Sanding down your putter will remove any existing paint or finish, so be sure to move slowly and evenly for the best results.

Primer and Paint

After sanding, you’ll need some primer and paint to give your putter a new look. There are many different types of primer and paint available on the market today, so do some research before making a purchase. You might even be able to find a custom color that matches your golf bag or other golf accessories.

Paint Brushes

You won’t be able to apply primer or paint without a good quality brush. Make sure you have at least one brush for each type of product you plan on using. You want to make sure that each coat is evenly applied for the best looking results.

Putty Knife

A putty knife can be used to remove any excess paint or primer from around the head of your putter. It can also be used for smoothing out any rough spots after sanding.

Finishing Wax

Once everything is painted and dried, you’ll want to apply a finishing wax to protect your putter from wear and tear. This will also give it an extra shine that will make it look brand new again!

How to Remove Rust from Your Scotty Cameron Putter

Removing rust from your Scotty Cameron putter can be a tricky task, but it is important to keep your putter in top condition. Rust can make your putter look unsightly and cause it to perform poorly. Fortunately, there are some simple steps you can take to remove rust and keep your putter looking like new.

The first step is to use an air compressor or a wire brush to remove any loose rust or dirt from the putter head. Be sure to wear safety glasses when using the wire brush as it will create flying debris. Once you have cleaned off any loose rust, you will need to use a chemical rust remover. There are several different types of chemical rust removers available on the market, so make sure you read the instructions carefully and follow them closely. Once you have applied the chemical remover, let it sit for the recommended amount of time before wiping it off with a clean cloth.

See also  rocco mediate witb

If there are still areas of rust on your putter head, you may need to use an abrasive pad or steel wool to remove them. When using an abrasive pad or steel wool, be sure not to scrub too hard as this could damage the finish on your putter head. After using an abrasive pad or steel wool, be sure to wipe down your putter head with a clean cloth and then apply a light coat of oil or wax to protect the finish.

Following these simple steps should help keep your Scotty Cameron putter free from rust and looking its best. If you take care of your putter properly, it should last for many years and continue to provide excellent performance on the golf course.

Using the Right Cleaning Supplies

When it comes to cleaning and polishing your Scotty Cameron putter, it is important to use the right cleaning supplies. Start by using a soft cloth or brush to gently remove dirt and debris from the putter head. A mild soap and warm water can be used to help loosen dirt from the putter. Avoid using any harsh cleaners or abrasive materials as these can damage your putter. After cleaning, dry off the putter with a clean cloth or towel.

Polishing Your Putter

Once you have cleaned your Scotty Cameron putter, you can begin to polish it. Use a soft cloth and an appropriate metal polish designed for golf clubs. Apply a small amount of polish on the cloth and rub gently in circular motions until you have achieved the desired level of shine. Be sure not to over-polish, as this could damage the metal finish of your putter. When finished, use a clean cloth to remove any excess polish from the putter head.

Storing Your Putters Properly

It is also important to store your Scotty Cameron putters in a safe place when not in use. If possible, store them in their original case in a cool, dry area away from direct sunlight or extreme temperatures. This will help protect them from wear and tear, as well as keep them looking new for years to come.

How to Restore the Grip on a Scotty Cameron Putter

The grip on a Scotty Cameron putter is one of its most important features, as it helps to ensure a consistent, comfortable stroke. Over time, however, the grip can become worn and slippery. Fortunately, restoring the grip on a Scotty Cameron putter is relatively simple. With the right supplies and some basic tools, anyone can restore their putter’s grip in no time.

The first step in restoring the grip on a Scotty Cameron putter is to remove the old grip. To do this, you will need a few basic tools such as a pair of pliers and an old towel or rag. Begin by wrapping the towel around the putters shaft and then use the pliers to carefully remove the old grip from the shaft. Once you have removed it, discard it and move onto step two.

The next step in restoring the grip on your Scotty Cameron putter is to measure and cut your new grip. Before cutting your new grip, take some time to measure your putters shaft so that you know how much grip you need to buy. When you have purchased your new grip, wrap it around your shaft and mark where you need to cut it in order for it to fit properly. Then use a sharp knife or razor blade to carefully cut off any excess material.

Once you have measured and cut your new grip, it’s time to install it onto your Scotty Cameron putter’s shaft. To do this, you will need a few more basic tools such as an adhesive tape measure or ruler, some lubricant (such as WD-40), and some double-sided tape or golf club tape adhesive (available at most golf stores). Begin by cleaning any dirt or residue from your shaft using WD-40 and then apply double sided tape or golf club tape adhesive along its length evenly spaced apart. Finally, slide your new grip onto the shaft until it is firmly in place and then use an adhesive tape measure or ruler to make sure that it is installed properly before securing with more double-sided tape or golf club tape adhesive if necessary.

See also  rizin 結果

By following these simple steps, anyone can quickly restore their Scotty Cameron Putter’s Grip back into top condition so that they can enjoy consistent strokes with every round of golf they play!

Changing the Weight of a Scotty Cameron Putter

Scotty Cameron putters are renowned for their high-quality craftsmanship and performance on the golf course. They have been used by some of the world’s top professional golfers, and they are a popular choice among amateur golfers as well. Many golfers prefer to customize their Scotty Cameron putter to suit their individual needs and preferences. One way to do this is to change the weight of the club head. Adjusting the weight can help you find a more comfortable feel or help you better control ball speed and accuracy.

The first step in changing the weight of your Scotty Cameron putter is to identify what type of weight system it has. Some models feature an adjustable sole plate, while others have interchangeable weights on the back of the club head. If your putter has an adjustable sole plate, you can simply loosen the screws with a screwdriver and slide the plate up or down to add or subtract weight from your club head. If it has interchangeable weights, then you will need to unscrew them from the back of the putter head and replace them with heavier or lighter weights.

Once you have identified what type of weight system your Scotty Cameron putter has, you will need to decide how much additional weight you want to add or subtract from your club head. This will depend on how comfortable you feel with your current setup, as well as what type of performance characteristics you are looking for in your putter. Once you have decided how much extra weight you want to add or subtract, then it’s time to start making adjustments.

Whether you are using an adjustable sole plate or interchangeable weights, it is important that you make small adjustments at a time and test out each new setup before making any further changes. After each adjustment, hit several practice shots on a putting green so that you can get a feel for how each new setup affects ball speed, accuracy, and comfort level.

By making gradual adjustments over time, eventually you should find a setup that works best for your individual needs and preferences. With some patience and practice, changing the weight of your Scotty Cameron putter can be a great way to customize it for better performance on the course!


Refurbishing a scotty Cameron putter is a great way to get the most out of your existing club. It can save you money, give you a sense of satisfaction and pride, and help you to extend the life of your club. With the right tools and materials, refurbishing your putter can be a straightforward process that will give you results that will last for many more rounds of golf. So, if you have an old putter in need of some love, don’t throw it away just yet – with a bit of effort, you can restore it to its original glory.

Ultimately, refurbishing a Scotty Cameron putter is worth the effort and can provide golfers with a great way to save money while still enjoying their golf game. With the right tools and materials, anyone can turn an old putter into something that looks almost as good as new. So what are you waiting for? Get refurbishing!

Michael Piko
Michael Piko

I am a professional golfer who has recently transitioned into the golf coaching profession. I have been teaching the game for more than 15 years and have been teaching professionally for 8 years. My expertise is working with everyone from beginners to pros

Popular Post